With the continuous popularization and development of plastic plates, it has gradually replaced ordinary plastic plates and has been widely used in various fields. When constructing the surface of the plastic board, it is necessary to ensure that the surface of the base layer is smooth, flat, clean and tidy, without any grease and impurities, and there should be no sanding or peeling on the ground. After passing the surface inspection, it can be installed. The base layer is a porous material with strong moisture absorption. In order to ensure better adhesion between the surface and the plastic plate, the adhesive surface of the plastic plate is generally painted first, and then the surface of the base layer, so that the paving effect will be more solid Beautiful. If the paving is not carried out in accordance with the requirements, it may affect the paste effect and cause the surface to bulge.
When applying the adhesive on the plastic board, it must be evenly applied to ensure that it is painted all around, and there must be no leakage, otherwise it will affect the airtightness of the plastic board and the surface. Also pay attention to choosing regular and good quality adhesives, and it is strictly forbidden to use expired products. Otherwise it will seriously affect the construction effect of the plastic board. When constructing the surface of the plastic board, pay attention to the temperature of the construction environment not too low, and it is best to keep it above 10°c. If the weather is too cold, it will affect the surface construction effect. It is forbidden to use different product models, to ensure that the color of the plastic board should be coordinated and unified to achieve a neat and uniform effect, which looks like a beautiful and generous visual experience.