Innovate Eco-friendly building material, Create sunshine life.

UNQ

What are the precautions for sticking tape when installing the sun board

by:UNQ     2021-02-28
u003cbru003eu003cpu003eWhat are the precautions for sticking the tape when installing the sun board of the sun board manufacturer? Although there is tape on the sun board, it is usually only used to temporarily protect the edge of the board. Its aging resistance is not good. Therefore, when installing the sun board, you must use engineering after cutting the board according to the size. The special tape seals the hole grid at the end of the board according to the requirements of the installation regulations, and replaces the original tape. u003c/pu003eu003cpu003e  Because the special adhesive tape for installation engineering should have good weather resistance, it will not lose its adhesion and mechanical strength even after long-term use on the sun panel. When attaching tape to the polycarbonate sheet during installation, not only must the edges of the board be smooth, but also all holes must be blown clean. The compressed air must be dry and free of impurities. u003c/pu003eu003cpu003e   At the same time, it is necessary to ensure that the profile and metal cover used for the installation of the sun panel, and the U-shaped protective groove at the end completely covers the tape. After the installation is completed, there should be no exposed parts. Then check the tape for loss before pre-installation and final installation. If it is found, the tape must be replaced. u003c/pu003eu003cpu003e   The emphasis here is on the cleaning method of the sun board. When cleaning, it must be washed with warm water below 60 ℃; and it is matched with neutral detergent. It is absolutely not allowed to use the sun board. Detergent, so as not to cause damage with the board. u003c/pu003eu003cpu003e   is required to use a soft cloth or sponge dipped in neutral liquid to gently scrub the sun board, and other hard and sharp tools such as coarse cloths, brushes, and mops are prohibited for cleaning. When grease, wet paint, tape marks, etc. appear on the surface, you can use a soft cloth to wipe with alcohol; and clean the dirt must be thoroughly rinsed with clean water. u003c/pu003eu003c/pu003eu003c/pu003eu003c/pu003eu003c/pu003eu003c/pu003eu003c/pu003eu003c/pu003e
The , essentially perfected by custom plastic sheets, is one of the first home appliance to be widely distributed.
Hebei Unique Plastics Manufacturer Co., Ltd looks forward for the meeting and the association with your esteemed company.
Hebei Unique Plastics Manufacturer Co., Ltd attach great importance to the quality of our products and R&D services.
custom polycarbonate sheet has obtained many affirmation in the market. Undoubtedlly, our customers are totally satisfied with our products.
Custom message
暂无友情链接数据
Chat Online
Chat Online
Chat Online inputting...
Sign in with: