Various processes in the cutting process of endurance board
The endurance board produced by the manufacturer has many specifications, but some occasions have special requirements in terms of specifications and shape. Therefore, do not customize the endurance board to save costs. You can cut the endurance board. What matters should be paid attention to in actual operation?
When cutting the endurance board, some sawdust will inevitably be produced. If it is not handled properly, it will easily attach to the surface of the board, which increases the difficulty of the later cleaning. Therefore, when cutting, it is best to use dry compressed air to blow the sawdust out of the groove to ensure that the endurance board is clean and tidy.
When cutting endurance boards, the most common cutting tools used are circular saws, hand saws or bow saws. If you want to cut fast and precise in size, a circular saw with a fine-tooth saw blade is more suitable. At the same time, the stability of the board must be ensured. In order to avoid scratching the surface, the integrity of the protective film must be ensured.