Precautions for the use of pc diffuser plate
pc diffuser plate manufacturers need to pay attention to some important matters when installing the plate. First, the plate should be cut off according to the actual size required, and the hole on the plate should be sealed with a special adhesive tape that is extremely viscous. As a result, the fixed plate is not easy to loosen. Don't stain the surface of the board, don't let the tape get dust or water, and make sure that the tape completely covers the hole. The tape is harmless and does not affect the quality of the board. The user also needs to carefully check whether the tape is intact. If there is any peeling tape, the user should replace them. In the process of using the plate, the user should regularly maintain and maintain it to extend its service life, thereby saving costs.
pc diffusion plate uses moderate temperature water and low-corrosive detergent to clean the plate, use a soft cloth to wipe the plate slowly, not rough or hard Or use a sharp tool to wipe the board. The user should wipe the board dry and not let the board stay in a wet state. Alcohol can help users remove traces of oil and glue on the board. When transporting the plates, the plates should be placed flat on the truck to reduce the vibration of the plates and prevent the plates from being damaged during transportation and causing economic losses to users.