Plastic board processing products and acceptance standards
Products processed by plastic plates and acceptance criteria
Products processed by plastic plates: PA nylon, PA6 nylon, PA66 nylon, MC nylon, POM polyoxymethylene, PP polypropylene, PTFE polytetrafluoroethylene, PEEK polyether ether ketone board and rod, PSU polysulfone board and rod, PEI polyetherimide, PES sulfone polylong, PVDF polyvinylidene fluoride, PET PETP polyethylene terephthalate. PPO polyphenylene ether board and rod .PPS polyphenylene sulfide board rod.CPVC chlorinated polyvinyl chloride.PMMA acrylic board rod.ABS acrylonitrile.PBT polybutylene terephthalate.PC polycarbonate.PE polyethylene.PVC polyvinyl chloride .UPE Ultra-high molecular weight polyethylene.PAI polyamideimide.PI polyimide.PU polyurethane.PPA polyparaphenylene terephthalamide, PFCC phenolic resin cotton.PBI polybenzimidazole, PLA polyester. Bakelite phenolic, synthetic slate carbon fiber board and other plastic board processing.
Acceptance standards for plastic board processing: During the construction of plastic board processing, the quality of the plastic layout construction should be checked and accepted from the following aspects: materials, colors, and paving should meet the requirements of residents; the surface is smooth , Smooth, no wrinkles, no warping or bubbling; consistent color, tight seams, and straight sides, the degumming area shall not be greater than 20c㎡, and the separation distance shall not be less than 500mm; the junction with the pipe should be tight, firm and flat; plastic The board processing skirting board is tightly connected with the plastic board, the skirting board has a straight edge, the overall length and height difference is not more than ±3mm, and it is closely attached to the wall with no gap.