Innovate Eco-friendly building material, Create sunshine life.

UNQ

PC endurance board cutting method and matters needing attention

by:UNQ     2021-03-02
u003cbru003eu003cpu003e The general width specifications of PC endurance board are 1.213m, 1.56m, 1.813m, 2.13m, but there are many customers who special need PC endurance board, and the specifications required are diversified. In order to save costs, we need to cut and cut. When cutting, you need to pay attention to the sawdust. The sawdust will be emitted into the air when cutting. When cutting the PC endurance board (not anti-static), the sawdust will be attached to the PC sheets, which is very difficult to clean. So you need to use dry compressed air to blow out the grooves when cutting. It can reduce the emission of sawdust into the air and can clean the PC endurance board, so that the cut PC endurance board is clean and tidy. u003c/pu003eu003c/pu003eu003cpu003e Generally, endurance board manufacturers will have board cutting machines; this kind of equipment is very convenient to cut, as long as the boards to be cut are positioned according to the required specifications; put down the fixed boards The pressure plate, easily press the equipment start button, and the required specifications endurance plate will be produced. With this kind of equipment, labor costs are continuously saved. At the same time, it also improves the efficiency in the same work. The production standard workshop equipment can cut PC endurance boards easily and accurately. The commonly used tools are circular saws, hand saws and bow saws. The circular saw is commonly used, and this kind of cutting is more common. The cutting speed is fast, the cutting is convenient, and the size cutting is also very good! Circular saws should use fine-tooth saw blades. u003c/pu003eu003cpu003e When using a manual or motorized hack saw, the plate should be clamped to the worktable to avoid undue vibration. In order to avoid scratching the surface, do not remove the protective film. After completion, there should be no grooves and debris on the edge of the PC endurance board. This method is often used at the construction site, and is a convenient and simple cutting method that is not commonly used with large cutting machines. u003c/pu003eu003cpu003eu003c/pu003eu003cpu003e Next articleAdvantages of UV-resistant PC solar panelsu003c/pu003eu003cpu003eu003c/pu003eu003c/pu003eu003c/pu003eu003c/pu003eu003c/p u003eu003c/pu003eu003c/pu003eu003c/pu003e
Many of us have heard about custom polycarbonate sheet and seen some of these units in operation in custom plastic sheets, custom plastic sheets and custom plastic sheets spaces.
Get cost effective and professional custom plastic sheets advice for your solution at UNQ Plastics. Hebei Unique Plastics Manufacturer Co., Ltd expert is your first choice!
custom plastic sheets custom polycarbonate sheet are primarily used for custom plastic sheets.
Custom message
暂无友情链接数据
Chat Online
Chat Online
Chat Online inputting...
Sign in with: