Overview of the entire processing flow of plexiglass processing
Plexiglass processing requires clarification of the size of the plexiglass product in order to accurately open the material, so as to avoid the waste of materials. Cutting: Use a cutting machine to cut the plexiglass sheet or use a laser cutting machine to cut. Engraving: After the opening is completed, the plexiglass sheet is preliminarily engraved according to the shape requirements of the plexiglass product, and carved into different shapes of graphics. Trimming: After cutting or engraving treatment, the edge of the plexiglass sheet is relatively rough, so the plexiglass trimming treatment must use a trimming machine. Punching: This process is based on the needs of plexiglass products, and some plexiglass products have small round holes. This step requires the punching process.
Plexiglas processing and polishing: After cutting, engraving, and perforating, the edges are relatively rough and easy to scratch the hands, so the polishing process is used. Polishing is also divided into grinding wheel polishing and cloth For wheel polishing and fire polishing, different polishing methods need to be selected according to the product. The specific distinguishing method is to check the polishing process of plexiglass products. Paper tearing: The paper tearing process is the processing method before the silk screen and hot bending process, because the plexiglass board will have a layer of protective paper after it leaves the factory, and the sticker pasted on the plexiglass board must be removed before the silk screen and hot bending. Silk screen printing: This method generally means that customers will choose silk screen printing if they need to display their brand LOGO or slogan. Silk screen printing is divided into monochrome screen printing and four-color (CNYK screen printing). You can learn more about the screen printing process of plexiglass products. Hot bending: Plexiglas can be changed into different shapes through hot bending. Hot bending is also divided into local hot bending and overall hot bending.
Plexiglas processing can specifically check the hot bending process of plexiglass products. Bonding ：Since plexiglass is soluble in chloroform, the mutual bonding between plexiglass does not require other adhesives, just use a small syringe (usually use 5ml to suck a small amount of chloroform liquid, gently and evenly Squeeze it onto the surface of the plexiglass to be bonded, and immediately press the bonding area tightly. After the liquid evaporates, the plexiglass will be bonded. Please pay attention to the appropriate amount of chloroform. If it is too small, the bonding area will be too large. Small and not strong; if too much, it will flow to other surfaces, it will leave imprints, affect the appearance, and the deformation of the data bubble will also affect the quality, and if you want to increase the area of u200bu200bthe joint, you can sprinkle around it. Some plexiglass powder (powder collected when filing plexiglass) is then dripped into chloroform. In addition, chloroform is a toxic chemical, and there are wounds on the hands that cannot be operated to avoid immersion into the human body from the wound. Packaging: This step is organic The last step in the glass product process is to complete the partial assembly of the entire plexiglass product and the packaging before leaving the factory.