Maintenance method of plexiglass processed products
Clean plexiglass processed products. If there is no special treatment or hardening agent added, the product itself is easy to wear and scratch. Therefore, for general dust treatment, you can use a feather duster or clean water to rinse, and then wipe with a soft cloth. If the surface is oily, you can add water with a soft detergent and scrub it with a soft cloth. For waxing products, you can use liquid polishing wax and wipe it evenly with a soft cloth to achieve the goal. Adhesion If the product is accidentally damaged, you can use IPS adhesive glue/adhesive methylene chloride type adhesive or quick-drying agent to bond it. Polishing If the product is scratched or the surface wear is not very serious, you can try to use a polishing machine (or car waxing machine) to install a cloth wheel, dip a proper amount of liquid polishing wax, and evenly polish it.
The relative molecular mass of plexiglass processing is about 2 million. It is a long-chain polymer compound, and the chain forming the molecule is very soft. Therefore, the strength of plexiglass is relatively high. , The ability of tensile and impact resistance is 7-18 times higher than that of ordinary glass. There is a kind of plexiglass that has been heated and stretched, in which the molecular chain segments are arranged in a very orderly manner, which significantly improves the toughness of the material. Use nails to penetrate this plexiglass, even if the nail penetrates, there will be no cracks on the plexiglass. This kind of plexiglass will not break into pieces after being penetrated by a bullet. Therefore, the stretched plexiglass can be used as bulletproof glass, and also as a cockpit cover on military aircraft.
plexiglass processing is light in weight. Thickness tolerance: The control of sheet thickness tolerance is an important manifestation of quality management and production technology. The thickness tolerance of the imported acrylic pouring sheet is controlled within +0.2mm. Transparency/whiteness: The strict raw material selection for organic glass processing, advanced formula follow-up and modern production technology ensure the excellent transparency and pure whiteness of the board. Crystal clear after flame polishing.