How to prepare for PC polycarbonate installation
Before the PC polycarbonate is installed, the protective film at the two edges of the perforated grid is lifted about 80-100 mm, which is conducive to sealing with special tape: if the manufacturer uses temporary tape for sealing, it should be removed first After lowering, stick a special tape; stick a sealant tape along the edge of the plate to ensure that all holes at the joint are properly sealed. Such common tools include circular saws, hand saws and hand saws. Use clean and tidy compressed air to blow out the rice husk ash in the welding bolts. The blade of the circular saw needs to have a special serrated shape. When using hand saws and hand saws, they should be clamped on the workbench to prevent vibration. There should be no notches or plastic shavings on the edge of the board. For thick and thin PC endurance boards, you can immediately use a sharp knife to cut the fiber laser. Lift the protective film about 80-100 mm along the long side of the plate, which is conducive to the fixed edge of the plate and it is not easy to press the protective film when it is in the aluminum alloy profile system. Tear off the protective film under the board before substantially installing the board. Removing the protective film too early is likely to cause damage to the board in the production and construction projects. PC sheets processing can easily and accurately cut the board with standard production line tools
At the same time, as the recent research of UNQ shows, the benefits of improved productivity and firm performance can make implementing basic management practices worth it.
Serving others for customers a better life with custom polycarbonate sheet for employees respect and opportunity.
With innovative technology, our professionals can spend more time focused on strategies that will improve custom polycarbonate sheet’s quality and deliver a more positive customers experience.
The lower cost of custom polycarbonate sheet, compared to other product, and Hebei Unique Plastics Manufacturer Co., Ltd’s services provide may well suit the needs for customers.
The manufacturing industry is changing fast, so, for Hebei Unique Plastics Manufacturer Co., Ltd, being able to pivot and adapt as the marketplace shifts is imperative.