Compared with our peers, our advantage in plexiglass processing lies in
plexiglass processing, so there are many low-quality and low-cost substitutes on the market. These substitutes, also known as 'acrylicThe surface hardness is low, easy to fade, and the polishing effect is poor after sanding with fine sand. The composite board has only a very thin layer of acrylic on the outside and ABS plastic in the middle. It is easy to delamination due to thermal expansion and contraction during use. True and false acrylic can be used to identify an important part of quality control from the subtle chromatic aberration and polishing effect of the sheet section.
The processing hardness of plexiglass can reflect the purity of the raw material MMA, the weather resistance of the board and the high temperature resistance. The hardness directly affects whether the sheet will shrink and bend, and the hardness is one of the parameters that best reflects the production process and technology of the cast acrylic sheet. Whether there will be cracks on the surface during processing. Hardness is one of the rigid indicators for judging the quality of acrylic sheets. Thickness tolerance: The control of sheet thickness tolerance is an important manifestation of quality management and production technology. The thickness tolerance of the imported acrylic pouring sheet is controlled within +0.2mm. Transparency/whiteness: to ensure excellent transparency and pure whiteness of the sheet. Crystal clear after flame polishing. Plexiglass has the advantages of light weight, low price, strict raw material selection, advanced formula follow-up and modern production technology. Easy to shape and other advantages. Molding methods include casting, injection molding, machining, thermoforming and so on.
plexiglass processing, especially injection molding, can be mass-produced, the process is simple, and the interest is low. Therefore, the application is becoming more and more extensive. At present, it is widely used in instrument and meter parts, automobile lights, optical lenses, transparent pipes, etc. In addition to its unparalleled high brightness, acrylic is the best new material for sanitary ware after ceramics. Compared with traditional ceramic materials. There are also the following advantages: good toughness, not easy to break; strong repairability, as long as you use a soft foam to dip the toothpaste, you can wipe the sanitary ware; the texture is soft, there is no icy feeling in winter; the colorful colors can meet the individual pursuit of different taste . Basins, bathtubs, and toilets made of acrylic are not only exquisite in style, durable, but also environmentally friendly. The radiation level is almost the same as the radiation level of the human body's own bones. Acrylic sanitary ware first appeared in the United States and currently accounts for more than 70% of the entire international market.